Geared for HUBZone Excellence

Services...

The following services are offered by our professionals. CLICK any section below to expand and learn more...

  • Environmental protection, assessment, and compliance issues are a concern to both large and small industries and government agencies with operating concerns.

    Street Legal Industries will provide the expertise and guidance to navigate you through the intricacies of your various environmental protection, assessment, and compliance concerns. Our personnel can provide this capability by identifying the potential project/facility environmental liabilities and applicable regulations, interfacing with regulators, and recommending primary and alternative courses of action as a basis for decisions. This approach will allow you to select the most suitable solution that achieves compliance, at the lowest cost, while maintaining a positive public opinion.

    Environmental SupportServices Summary

    Regulatory Analysis and Agency Interface:
    NEPA, CWA, RCRA, SDWA, SARA/CERCLA, CAA, TSCA

    Integrated Environmental Program Development:
    Surface Water Discharge,Waste Management, Air Emission Control Hazardous Materials Control and Evaluation, Air Dispersion Modeling, Analytical Data Validation Management, TSCA/RCRA storage/treatment

    Plan and Procedure Development:
    Waste Minimization, SPCC, Pollution Prevention, Stormwater Management, UST Closure, Emergency Response, Task Management, Risk Management, RCRA/TSCA Waste Operations and Management, Spill Response and Inspections

    Training Development and Delivery:
    Classroom/field, CD/web based, Compliance/regulations driven, Policies, Procedures, Operations, Tracking database

    Permit Application Development:
    NPDES Stormwater and Point Source, Dredge and Fill, Title V, Construction

    Assessments, Surveillances, and Audits:
    Compliance (past, present & future), Phase I & II, Project & Facility


  • Issues related to industrial and construction worker health and safety are an overriding concern for any facility. Performing these activities in today's environment require a comprehensive knowledge of local, state, and federal regulations, as well as an ability to effectively and efficiently integrate these requirements into facility operations. Assessing the compliance and efficiency of program implementation and the development of new needed programs for companies in a cost-effective, comprehensive manner is part of our expertise. SLIND provides comprehensive health and safety services, for both construction and industry, including program development, review studies, and oversight. We will provide an experienced and qualified team of professionals to meet your immediate and long-term needs. Our personnel qualifications include: Certified Industrial Hygienist, Certified Safety Professional, and Certified Health Physicist.

    SLIND will provide the expertise and guidance to navigate you through the intricacies of your various environmental protection, assessment, and compliance concerns. Our personnel can provide this capability by identifying the potential project/facility environmental liabilities and applicable regulations, interfacing with regulators, and recommending primary and alternative courses of action as a basis for decisions. This approach will allow you to select the most suitable solution that achieves compliance, at the lowest cost, while maintaining a positive public opinion.

    Industrial and Construction Safety and Health Services Summary

    • - Engineering Controls for Occupational Health Hazards
    • - Program Development
    • - Program Audits, Assessments, and Surveillances
    • - Indoor Air Quality Evaluation
    • - Certified Crane Instructor Inspections
    • - Accident Tracking and Trending
    • - Health Risk Assessments
    • - Industrial Hygiene Program Technical Support
    • - Health Physics Program Technical Support
    • - Standard Operating Procedure and Work Plan Development
    • - Training Development and Delivery
    • - Hazardous Materials Management & Communications
    • - Field Surveys
    • - OSHA Interpretations and Planning
    • - Specialty Inspections (e.g., Cranes, Hoisting and Rigging)


  • Decommissioning is more than a technical process. It is the assessment of and control of all hazards at a facility that is targeted for closure. The process can begin long before the decision is made to close the facility. The control of the decommissioning process requires the ability to evaluate the cost of any constraints and the ability to change or affect those constraints.

    SLIND addresses the entire decommissioning process with the goal of controlling the process and minimizing the costs of decommissioning. SLIND incorporates both the known costs and the future risks. Starting with engineering and financial reviews. Assisting management decisions. Incorporating configuration management in planning and execution. Identifying licensing needs. All this is conducted by utilizing proven professionals with direction through experience. In short, we provide the tools and expertise to help the client control the decommissioning process.

    Decommissioning Planning and Control Support Services Summary Cost Estimates
    • - Financial Evaluations of Decommissioning Options
    • - Configuration Management of Decommissioning
    • - Hazard Control Plans for Decommissioning
    • - Environmental Assessments
    • - Task Safety Reviews Risk Assessments
    • - Exposure Assessments
    • - Regulatory Assessments
    • - Waste Management Options Analysis


  • Facility Management And Operations has become a major area of focus for large and small commercial and government clients. For corporations and government agencies, it has been recognized as a major area of emphasis in order to improve equipment reliability, reduce indirect costs, and contribute to the "bottom line" in a positive manner. Operations are integrally tied to facility activities, and hence, represents a combined opportunity for increasing overall plant and facility efficiency.

    SLIND addresses both the specialized and ordinary aspects of facility management and operations activities ranging from boiler plants to water chemistry. The list of both current and upcoming opportunities for savings and enhanced functionality in the facilities management and operations areas is astounding. SLIND can assist you in maintaining the best possible operations and schedules.

    Facilities Management and Operations Support Services Summary

    The following lists a few of the many supporting functions and enhancements that can be provided:

    • - Preventive, Predictive and Corrective Maintenance Programs
    • - Plan and Procedure Development: Waste Minimization, SPCC, Pollution Prevention, Stormwater Management, UST Closure, Emergency Response, Task Management, Risk Management, RCRA/TSCA Waste Operations and Management, Spill Response and Inspections
    • - Specialized Nondestructive Assay Analysis and Testing
    • - Facility Records Management and On-line Tracking
    • - ISO 9000 & 14000 Series
    • - Operability Certification Preparations
    • - Plant Systems Integration and Remote Systems Operations Insurance Analysis for Premium Reductions Suspect and Counterfeit Parts Identification and Control Compliance with Federal Regulations (i.e., ADA and others)
    • - Integration with Facility Safety
    • - Fire Protection and Industrial Hygiene
    • - Vibration Analysis and Failure Methods Statistical Reliability Analysis and Quality Methods
    • - Formality of Operations and Procedure Support
    • - Configuration Control
    • - Integrated Safety Management System (ISMS) Program Development


  • SLIND offers a comprehensive training service. Our experienced staff will assist you in addressing your organization's particular needs, problems, and opportunities.Our goal is to provide practical solutions and value-added training services that ensure you and your organization succeed. Our professional team is comprised of

    1. Technical specialists, including environmental, health, and safety professionals
    2. Generalists in instructional design, organization development, and human resources/personnel
    3. Design and computer programming personnel

    SLIND's first step in organizing and preparing (developing) a training program is to analyze what training is required and/or needed to improve operations. Then the focus moves to how the training should be designed, developed, and implemented to ensure the program is organized, effective, integrated, and in full compliance with regulatory and Company requirements. SLIND can design classroom and computer (CD-based and web-based) training programs as well as distance learning.

    Each step in the process feeds back to previous steps until the process is completed. SLIND emphasizes the training management requirements (e.g., documentation and timing) as well. Considerable efficiency may be gained by coordinating the timing of training and the proper management of required documentation. Our model for the training development process is presented in the training model.

    Summary of Training Developed and Delivered
    • - Conduct of Operations
    • - Decontamination and Decommissioning
    • - Emergency Preparedness and Spill Response
    • - Environmental Protection (compliance programs and regulations)
    • - Fire Protection and Safety Systems
    • - Industrial Hygiene
    • - Integrated Safety Management Systems
    • - Introduction to Computers
    • - Facility Operating Procedures
    • - OSHA and Safe Work Practices
    • - Radiation Protection, including Criticality Safety
    • - Security and Safeguards
    • - Use of the Internet and World Wide Web

    Print course information PDF


  • Every business generates and maintains large amounts of information. Proper electronic management of this information is imperative for success. The problem that many companies face is unfamiliarity with various computer software that handle and organize data and the difficulty in communicating the technical issues inherent to the data to those managing the data. Unproductive hours result and employee time can be wasted without the right approach for information management.

    SLIND's professionals are knowledgeable of the issues that surround the environmental, decontamination and decommissioning, health and safety, and facility management and maintenance fields. Additionally, SLIND incorporates and validates both the known data parameters and desired system structure. This produces an information management system that is both useable and upgradeable. This hierarchical design allows for the inevitable "change of data ... let's add more data" routine. Applications can range from single flat files to relational graphics interfaces, all at your option. All programs are fully documented for ease of use and training.

    Information Management Support Services Summary
    • - Relational Data Base Design
    • - Computer-Aided Design and Manufacture (CAD/CAM)
    • - Network Applications Graphical Mapping and Object Linking
    • - Configuration Management
    • - Hazard Location Control
    • - Personnel Records Management
    • - Document Control/ Records Storage and Retrieval Secure Records Control
    • - Construction/Modification Tracking Data Linking and Translation
    • - Web Site and Communications Development
    • - Information Architecture
    • - Data Base Streamlining and Consolidation
    • - Action Item Tracking


  • Street Legal Industries, Inc. (SLIND) has been awarded a five year Basic Ordering Agreement (BOA) with the Department of Energy (DOE) for materials disposition. The scope includes divesting DOE and its prime contractors of radioactive or non-radioactive contaminated material such as scrap metal, equipment, vehicles and the demolition of structures with consideration for their residual asset value.

    SLIND will provide the expertise and guidance to navigate you through the intricacies of your various environmental protection, assessment, and compliance concerns. Our personnel can provide this capability by identifying the potential project/facility environmental liabilities and applicable regulations, interfacing with regulators, and recommending primary and alternative courses of action as a basis for decisions. This approach will allow you to select the most suitable solution that achieves compliance, at the lowest cost, while maintaining a positive public pinion.

    Related example practices and experiences

    • - Disposition (sales) of equipment
    • - Disposition of metals and chemicals, including:
      • -  process equipment
      • -  feed stock
      • -  precious metals and inventories
    • - Radiological decontamination under a mobile license using mechanical and chemical processes
    • - Demolition of buildings and temporary structures

    Steps to implementation
    • - Identify the material for disposition
    • - Contact the DOE BOA administrator
    • - Develop a Task Order (Scope of Work)
    • - Contact SLIND & Company (anytime during the process)

    Advantages to you
    • - Existing contractual mechanism
    • - SLIND is pre-qualified to perform task orders
    • - Task orders awarded within two weeks of identified scope
    • - Task Orders performed on-site and off-site
    • - Your scope of work Flexibility
    • - Support of pollution prevention programs
    • - Potentially no cost to you!

    Contract #: DE-AK05-01OR22784

    Print MDT Brochure Radiological Disposition Activities Solutient Technologies


  • Facility Representatives Program

    Street Legal Industries, Inc. (SLIND) provides support to the EM Facility Representatives in training, program development, and implementation in the following areas:

    • - Classroom and Field Training and Delivery
      • -  8 Hour Hazwoper
      • -  Conduct of Operations
      • -  Computer Security
      • -  Environmental Compliance
      • -  Heavy Equipment Operation and Maintenance
      • -  Crane Maintenance and Operation
      • -  Occurrence Reporting and Processing Systems (ORPS)
      • -  Occupational Safety and Health (OSHA)
      • -  Price Anderson Amendment Act (PAAA) (830/835 and 150/151)
      • -  Safety Basis Program Documentation
      • -  Transportation Oversight
    • - General Technical and Functional Area Examination Preparation
    • - Applied Engineering Fundamentals
    • - Qualification Area Determination
    • - Qualification Standard/Card Development
      • -  Determine Source Documents
      • -  Assemble Source Documents
      • -  Develop Objectives
      • -  Determine Performance Requirements
      • -  Facilitate sign-offs
    • - Examination Bank/Version Development and Maintenance
      • -  Developed and Implemented via Access Database
    • - Oral Evaluation Documentation and Instruction
    • - Safety Basis Training Program Documentation
    • - Training Scheduling and Tracking
    • - Establish and Maintain Source Document Library
    • - Establish and Maintain Records

    SLIND provides mentoring support to the Facility Representative group in the following areas:
    • - Program Procedure Development
    • - Program Assessments
    • - Facility Rankings and Human Resource Lending Determination
    • - Walkthroughs


    Safety Systems Oversight Training/Mentoring Support



    SLIND provides support to the Safety Systems Oversight personnel in the following areas:
    • - Qualification Area Determination
    • - Qualification Standard/Card Development
      • -  Determine Source Documents
      • -  Assemble Source Documents
      • -  Develop Objectives
      • -  Determine Performance Requirements
      • -  Facilitate Sign-offs
    • - Training Scheduling and Tracking
    • - Establish and Maintain Records


  • Information Coming Soon...


  • Street Legal Industries provides other services which are key to our clients, success. Examples of selected services are briefly outlined below. Additional information on our specific approach will be provided upon request.

    Quality Assurance Services:
    • - ISO 9000 & Mil-Specs
    • - Inspections & Corrective Actions


  • Street Legal Industries provides other services which are key to our clients, success. Examples of selected services are briefly outlined below. Additional information on our specific approach will be provided upon request.

    Infrastructure Support Services:

    • - Roads and Grounds & Utilities
    • - Facility Re-Use, Strategic Planning
    • - Project Management
    • - Cost-Benefit Analyses


  • Street Legal Industries provides other services which are key to our clients, success. Examples of selected services are briefly outlined below. Additional information on our specific approach will be provided upon request.

    Engineering Services:

    • - Professional Engineers
    • - CAD/CAM
    • - Chemical
    • - Computer
    • - Electrical & Electronic
    • - Environmental
    • - Fire Protection
    • - Industrial
    • - Mechanical
    • - Nuclear


  • Street Legal Industries provides other services which are key to our clients, success. Examples of selected services are briefly outlined below. Additional information on our specific approach will be provided upon request.

    Customized Services:

    • - Contract Services
    • - Cost Control